Atlantic 67035416 manual Assembly Tips

Page 2

Assembly Tips:

Become familiar with the instructions and all parts.

Make sure that all parts are in the box and in good condition.

Assemble the product on the open flat carton or a rug.to protect the product and your floor.

Some heavy products need a second person to assist in the assembly. Use of power tools is not recommended.

It is strongly recommended that at least two people carry out the assembly. Assemble the product close to a wall.

With each step, first insert and hand-tighten all bolts and screws by hand. After ALL BOLTS are slightly screwed in, fully tighten bolts with Phillips screwdriver in sequential pattern (clockwise or counter clockwise).

!Caution:

Never let children climb on furniture or play with furniture. Do not sit or stand on furniture.

Do not place a TV that is heavier than the recommended load rating on the furniture surface.

Do not overload shelves.

Use care when moving furniture. Furniture can tip over if moved improperly. Only move furniture when it is empty of TV or other electronic components.

Improper handling can result in cuts and lacerations.

Do not install on sloping surface.

Care Instructions:

Use electrostatic dust cloths to clean furniture.

Do not set hot or cold containers directly on the furniture surface.

- 2 -

Image 2
Contents Item #67035416 Nero TV Stand Assembly Tips Item Components parts list Qty Attach frames E&F to the pillars B&C with screws Fasten pillars D to the frames E&F with screws J Attach back panel a to the unit with screws K Insert pads L into frames E&F Place glass G&H on the pads Max lbs