Apollo 150 III, 120 III user manual Apollo Stand to Main System Assembly

User Manual version 2305

To assemble the stand module (Fig. 5-14 (1)) to the main system (2), simply tighten the two units together with 4 screws from the base. Then, install the two base back covers (4 & 5) to the unit as shown below. There is an additional knob in the accessory. If touchscreen is to be used with the system, it is suggested that the additional knob is to be assembled to the system to prevent the system from wobbling. By swiveling the knob and pulling the base up and down, the angle can be fixed at 45 to 900.

¥DÅé»P°ò®y²Õ¥ß

°ò®y²Õ«~

¥DÅé²Õ«~

APOLLO 120/150 ©³®y-×¹¤W»\¢

APOLLO 120/150 ©³®y-×¹¤U»\¢

FIGURE 5-14: APOLLO STAND TO MAIN SYSTEM ASSEMBLY

APOLLO 120/150 III 5-75