User Manual version 2305
The APOLLO 120/150 III consists of a Celeron/ Pentium ® III multimedia motherboard with an adequate CPU and relevant SDRAM on it. The system control board and other internal devices such as expansion card, HDD and power supply are already housed in a plastic rear cover. The system’s performance depends on the installed CPU and the capacity of the system memory and hard disk drive. In some circumstances, you might intend to upgrade or maintain the system. By removing the rear cover and the metal covers, the internal components such as CPU, SDRAM, HDD, internal FDD,
The APOLLO is composed of 10 major modules. The installation procedure is also listed as below.
1.Motherboard module
2.Touchscreen controller module
3.HDD module
4.LCD module
5.Front bezel module
6.
7.Power supply module
8.Expansion slot module
9.Back panel module
10.Stand module
To disassemble the system module for maintenance, the procedure is from step 10 to 1.
APOLLO 120/150 III |
