Apollo 120 III, 150 III user manual Stand Module Assembly, Apollo Pedestal Assembly

User Manual version 2305

5.13.Stand Module Assembly

The APOLLO system comes with a versatile stand composing of one big pedestal and one set of cable management covers. The following figure illustrates the steps to make up the APOLLO stand.

1.Refer to Fig. 5-13. Fix the two hinges to the hinge bracket

(5). Then fix the unit to the metal base (1). Please note that the two hinges are different. The right side is used to fix the hinge knob. Note that there are two avocado-shape holes on the metal base. The two avocado holes are used to fix the stand to the table for special application.

2.Insert the stand bottom cover (4) to the hinge module and fix them together with four FMS 3*6 screws.

3.Fix the plastic upper cover (6) to the hinge bracket with 2 screws.

4.Insert the whole base unit to the base plastic cover (7) and fix them together with screws to make the complete unit a pedestal.

5.Insert the hinge knob (2) to the pedestal.

	APOLLO °ò®y¼Ò²Õ
	©³®yÅKªO
	HINGE (¥ª) with LOCK
	HINGE (¥k)
	APOLLO 120/150 Âà¶b-×¹¤U»\¢
	Âà¶b¤ä¬[
	APOLLO 120/150 Âà¶b-×¹¤W»\¢
	APOLLO 120/150 ¶ì½¦©³®y
	FIGURE 5-13: APOLLO PEDESTAL ASSEMBLY
5-74	APOLLO 120/150 III