User Manual version 2305
uQUICK POWER ON SELF TEST
This category speeds up Power On Self Test (POST) after you power up the computer. If it is set to Enable, BIOS will shorten or skip some check items during POST.
Enabled Enable quick POST Disabled Normal POST
uFIRST/SECOND/THIRD/OTHER BOOT DEVICE
The BIOS attempts to load the operating system from the devices in the sequence selected in these items.
The Choice: Floppy, LS/ZIP, HDD, SCSI, CDROM & Disabled.
uSWAP FLOPPY DRIVE
If the system has two floppy drives, you can swap the logical drive name assignments.
The choice: Enabled & Disabled.
uBOOT UP FLOPPY SEEK
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled & Disabled.
uBOOT UP NUMLOCK STATUS
Select power on state for NumLock.
The choice: Enabled & Disabled.
uGATE A20 OPTION
Select if chipset or keyboard controller should control GateA20.
Normal A pin in the keyboard controller controls GateA20 Fast Lets chipset control GateA20
uTYPEMATIC RATE SETTING
Key strokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be selected.
The choice: Enabled & Disabled.
APOLLO 120/150 III |
|
