User Manual version 2305
uPARALLEL PORT MODE
Select an operating mode for the onboard parallel (printer) port. Select Normal, Compatible, or SPP unless you are certain your hardware and software both support one of the other available modes.
The choice: SPP, EPP, ECP, ECP+EPP.
uECP MODE USE DMA
Select a DMA channel for the parallel port for use during ECP mode.
The choice: 3, 1.
uUSB CONTROLLER
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals.
The choice: Enabled or Disabled.
uUSB KEYBOARD SUPPORT
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard.
The choice: Enabled or Disabled.
uIDE HDD BLOCK MODE
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.
The choice: Enabled or Disabled.
uINIT DISPLAY FIRST
This item allows you to decide to active which bus first (PCI Slot or AGP first).
The choice: PCI Slot or, AGP.
uSYSTEM SHARE MEMORY SIZE
This item defines the System Share Memory Size for video. The choice: 2MB, 4MB, 8MB, 16MB, 32MB, 64MB
APOLLO 120/150 III |
