Extron electronic 68-1370-50 REV. C Selecting lock mode 2 or toggling between lock modes 2

•• Advanced features consist of:

•• Setting video and audio output mutes

•• Creating I/O groups

•• Setting the RS-232/RS-422 port protocol and baud rate

NOTE: The switcher is shipped from the factory in lock mode 2.

Selecting lock mode 2 or toggling between lock modes 2 and 0

NOTES: • If the switcher is in lock mode 0 or 1, this procedure

selects mode 2.

• If the switcher is in lock mode 2, this procedure selects mode 0 (unlocks the switcher).

Toggle the lock on and off by pressing and holding the Enter, Video, and Audio buttons simultaneously until the following buttons blink twice (approximately 2 seconds).

•• The Esc, Video, and Audio buttons blink if the DXP is now in lock mode 2.

•• The Video and Audio buttons blink if the DXP is now in lock mode 0.

Press and hold simultaneously.

ENTER

ENTER

I / O

VIDEO AUDIO

2 seconds

I / O

VIDEO AUDIO

The buttons blink twice. Release the buttons.

Figure 16. Press and Hold the Enter and the Two I/O Buttons Simultaneously

Selecting lock mode 2 or toggling between modes 2 and 1

NOTES: • If the switcher is in lock mode 1, this procedure selects

mode 2.

• If the switcher is in lock mode 2, this procedure selects mode 1 (locks all switcher functions except selecting mode 2).

DXP DVI Pro and DXP HDMI Series • Operation 17