DXP DVI Pro and DXP HDMI Series • Remote Control 31
Command Function | ASCII Command | Response | Additional Description | |
(Host to Switcher) | (Switcher to Host) | |||
|
| |||
|
|
|
| |
|
|
|
| |
IP Setup (Continued) |
|
|
| |
Set gateway IP address | EX3^CG} | IpgX3^] |
| |
Read gateway IP address | ECG} | X3^] |
| |
Set DHCP on and off | EX4^DH} | IdhX4^] |
| |
Read DHCP on/off status | EDH} | X4^] |
| |
Configure current port timeout | E0*X5*TC} | Pti0*X5*] |
| |
Read current port timeout | E0TC} | X5*] |
| |
Configure global IP port timeout | E1*X5*TC} | Pti1*X5*] |
| |
Read global IP port timeout | E1TC} | X5*] |
| |
Set verbose mode | EX5#CV} | VrbX5#] |
| |
Read verbose mode | ECV} | X5#] |
|
NOTE: X3^ = IP or Gateway address or subnet mask nnn.nnn.nnn.nnn
X4^ = DHCP status | 0 | = DHCP off, 1 = DHCP on |
X5# = Verbose mode | 0 | = clear or none (default for Telnet connection) |
| 1 | = verbose mode (default for |
| 2 | = tagged responses for queries |
| 3 | = verbose mode and tagged for queries |
X5* = Port timeout interval 1 | (10 seconds) – 65000 (default is 30 = 300 seconds = 5 minutes) | |
