Extron electronic 68-1370-50 REV. C, DXP HDMI setup guide Password Prompt for Control Program

4.Click OK.

•• If you selected a serial port in step 2, the Matrix Switchers Control Program is ready for operation.

•• If you selected IP [LAN] in step 2, the IP Connection window appears.

Figure 23. Password Prompt for Control Program

a.Check the Matrix IP Address field, which displays the last Matrix IP address entered. If necessary, enter the correct IP address for your switcher in the field.

NOTE: 192.168.254.254 is the factory-specified default value for this field.

b.If the switcher is password protected, enter the administrator or user password in the Password field.

c.Click Connect. The Matrix Switchers Control Program main window opens.

Figure 24. Matrix Switchers Control Program Window

DXP DVI Pro and DXP HDMI Series • Remote Control 35