Atlas MLGC180W, MLGC180B manual Mounting Black to White to Strap

Page 3

Wire the Light Control

WARNING: Turn power off at circuit breaker or fuse.

Remove the existing light fixture.

Install the mounting strap as shown using two screws that fit your junction box.

The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

Route the light control’s wires through the large gasket holes.

Twist the junction box wires and fixture wires together as shown. Secure with wire connectors.

Mounting

 

 

 

Black to

 

White to

Strap

Black

 

White

 

 

 

 

Rubber

Plug

Mounting

Bolt

Gasket

Junction box ground wire to green ground screw on fixture.

Mount the Light Control

Align the light control cover plate and cover plate gasket. Secure with the mounting bolt.

Align the three slots in the decorative shell with the bulb holder pins. Push the shell in and then twist clockwise to lock. Repeat for other shell.

Shell Slot

Push the rubber plug firmly into place.

If a wet location junction box was not used, caulk the wall plate mounting surface with silicone weather sealant.

To avoid water damage and electrical shock, keep bulb holders 30° below horizontal.

 

Keep bulbs at least

 

1" (25 mm) from the

Lock Nut

sensor. Do not allow

 

the bulbs to block

Lens

the lens.

Adjust the bulb holders by loosening the lock nuts but do not rotate the bulb holders more than 180° from the factory setting.When screwing in the floodlamps, do not overtighten.

598-1098-02

Image 3
Contents Features OperationRequirements Eave Mount InstallationMode Switching Summary Wall MountMounting Black to White to Strap Junction box ground wire to green ground screw on fixtureAvoid aiming the control at Test and AdjustmentTurn on the circuit breaker and light switch Bottom of SensorTroubleshooting Guide SpecificationsFive Year Limited Warranty 598-1098-02 598-1098-02

MLGC180W, MLGC180B specifications

The Atlas MLGC180W and MLGC180B are state-of-the-art mobile generators designed to meet the demands of various applications ranging from recreational use to heavy-duty industrial tasks. These generators stand out for their advanced technological features, making them reliable companions for outdoor activities, construction sites, and emergency power supply situations.

One of the primary features of the Atlas MLGC180 series is its powerful engine. Both models are equipped with a robust gasoline engine that provides consistent power output, ensuring that users can rely on them for uninterrupted operation. The generators typically deliver a rated power of 1800 watts, allowing for the simultaneous operation of multiple devices such as power tools, lights, and appliances.

Portability is another key characteristic of the Atlas MLGC180W and MLGC180B. Weighing significantly less than comparable generators in their class, they come with integrated wheels and a collapsible handle, making transportation effortless. Whether being moved across a job site or loaded into a vehicle for a camping trip, users will appreciate the ease of maneuverability.

Energy efficiency is paramount in today's atmosphere of sustainability, and Atlas has incorporated features in the MLGC180 series that promote eco-friendly operation. The generators are designed with advanced fuel management systems that optimize fuel consumption while minimizing emissions, making them an environmentally responsible choice for consumers.

Additionally, both models boast a user-friendly control panel that showcases clear indicators for power output and remaining fuel, allowing users to monitor their generator's performance effortlessly. The MLGC180 series also comes with multiple outlets, including standard household and USB ports, enabling users to charge devices and power tools simultaneously.

Safety features are also a cornerstone of the Atlas MLGC180 series. They are equipped with overload protection, ensuring that users and equipment are safeguarded against electrical surges. Built-in circuit breakers and low-oil shutdown mechanisms provide additional layers of safety, enhancing the reliability of these generators.

In conclusion, the Atlas MLGC180W and MLGC180B mobile generators are designed with power, portability, and efficiency in mind. Their advanced features make them suitable for a wide range of applications, appealing to both casual users and professionals alike. With their innovative technologies and commitment to safety, the MLGC180 series is undeniably a standout choice in the generator market.