Aquatic Delicair Laundry Basin instruction

INSTALLATION INSTRUCTIONS/GUIDELINES

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLATION

PRE-INSTALLATION PROCEDURES

Note: A good knowledge of construction techniques, plumbing and electrical installation according to codes are required for proper installation. We recommend that a qualified licensed contractor perform the installation of all Aquatic products. Our warranty does not cover improper installation related problems.

1.Immediately upon receiving your Aquatic Delicair sink, inspect it thoroughly for freight damage. If necessary, contact your dealer/distributor immediately. Should inspection indicate any damage, do not install the Delicair sink.

Damage or defect to the finish claimed after the Delicair sink is installed is not covered under the warranty.

2.Remove packing material between the sink and blower.

3.All Delicair sinks are filled with water and operated in our manufacturing facility prior to shipment. Inspectors ensure watertight operation; however, rough handling may cause leaks which may be detected prior to installation.

TO INSPECT:

4.Place the Delicair sink in an area where it may be drained after testing.

5.Fill the Delicair sink with hot water (approx. 100 degrees F) and allow to stand for 10 minutes. Carefully inspect all fittings and connections for leaks.

6.Plug in blower cord and run the air blower on high speed for 10 minutes.

7.Inspect the Delicair sink completely. Any defect must be reported to Aquatic Industries, Inc. prior to installation in order to have it covered by warranty. Should inspection indicate any damage or leaks, do not install the Delicair sink.

Damage or leaks claimed after the Delicair sink is installed are not covered under the warranty.

8.Check to ensure that your installation will conform to all applicable codes and secure necessary permits. All electrical and plumbing connections should be made by qualified electricians and plumbers.

WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS DURING INSTALLATION

WILL RESULT IN TERMINATION OF THE WARRANTY.

Do not lift the Delicair sink by any portion of the plumbing or blower.

Do not stand in or on the Delicair sink during construction.

DO NOT MAKE ANY ALTERATIONS, ADDITIONS OR DELETIONS TO THE DELICAIR SINK SYSTEM.

WARNING: The Delicair sink blower and piping is factory assembled. Relocation of blower or other modifications could adversely affect the performance and safe operation of the Delicair sink. Aquatic Industries, Inc. shall not be liable under its warranty or otherwise for personal injury or damage caused by any such unauthorized modification.

NOTE: The Delicair sink should remain in its shipping carton until time of installation.

9.Literature dimensions are for reference only. Installation dimensions should be taken directly from the Delicair sink. An access opening of at least 16” x 16” minimum must be provided by the blower allowing sufficient clearance to make final connections and for servicing of the blower. It is the installer’s responsibility to provide sufficient service access.

NOTE: Watertight installation of the drain is the installer’s responsibility. Drain leakage is not included in the warranty of this product.

Aquatic Industries, Inc.

Delicair Laundry Basin specifications

The Aquatic Delicair Laundry Basin is a cutting-edge addition to modern laundry technology, designed to combine efficiency with elegance. This innovative product redefines the laundry experience by integrating durability, functionality, and style, catering to the needs of today’s environmentally conscious consumers.

One of the main features of the Aquatic Delicair Laundry Basin is its superior design. Constructed from high-quality, stain-resistant materials, the basin is both easy to clean and built to last. The sleek, minimalist aesthetic fits seamlessly into any laundry room or utility space, providing a sophisticated look without compromising on performance. Its generous capacity accommodates larger loads, making it an ideal solution for busy households.

Technologically, the Delicair Laundry Basin is equipped with advanced water-saving features. The basin incorporates a smart drainage system that optimizes water usage, efficiently directing excess water while minimizing waste. This system is further enhanced by an integrated filtration system that captures lint and debris, ensuring that the water used is as clean as possible. This eco-friendly approach not only conserves resources but also promotes a sustainable lifestyle.

Another significant characteristic of the Delicair Laundry Basin is its flexibility. Designed to handle various types of fabric, including delicate items that require special care, the basin offers customizable wash settings. Users can choose from a range of options tailored to specific laundry needs, such as gentle washing for sensitive fabrics or heavy-duty cycles for tough stains. This adaptability ensures that every item, from everyday garments to luxury fabrics, receives the attention it deserves.

Furthermore, the basin features an ergonomic design, with a comfortable height and an accessible layout that prevents strain during use. The built-in drying shelf provides additional convenience, allowing users to air-dry delicate items without the need for a separate drying rack.

In summary, the Aquatic Delicair Laundry Basin combines aesthetic appeal with advanced technology and exceptional functionality. Its innovative design, water-saving capabilities, and versatile features make it a must-have for anyone seeking to enhance their laundry experience, all while contributing to a more sustainable future.