Drilling holes for faucet hardware

After selecting a faucet system for your Delicair sink, you will need to follow the instructions below to install the faucet and hardware.

Tools Needed: Hole saw (cutter), refer to faucet requirements for correct size; felt tip marking pen; drill; correct size wrench(s) for tightening faucet hardware; and Teflon plumbers tape.

1.Before drilling the hole(s), check the position of the faucet to ensure that it will not interfere with the sink or its plumbing.

2.Using the template that came with the faucet, use a felt tip pen and mark the center of the hole location(s) to be drilled.

3.Check the faucet instructions for the proper size hole cutter to be used. Using the hole cutter, drill the hole(s) from the outside (acrylic side) of the sink. Care should be taken to prevent the drill from slipping. Always point the drill away from the body when drilling holes. Never drill towards your body.

4.Do not push down too hard on the drill; let the bit do the cutting. Be careful not to over heat the acrylic surface with the drill bit.

5.Test fit the faucet in place, tighten the hardware making sure not to over tighten the retaining nut(s) that hold the faucet to the sink to prevent the acrylic material from being damaged. Teflon tape may be used on threaded fittings.

6.Install any remaining plumbing and hardware to the sink.

Operating Instructions

DELICAIR I

On/Off Button: The blower can be turned on or off by pressing this button. Press the button once and the blower will turn on. Press the button again and the blower will turn off.

Blower Speed Adjustment: Once the blower is on, the blower is now in adjustable mode. The blower starts on high speed. To lower the speed, press the minus (-) button. To increase the speed, press the plus (+) button.

Blower Pulse Mode: Once the blower is on, press both the plus button and the minus button simultaneously. The blower speeds will alternate from slow to fast. To return to constant speed, press either the plus or minus button once.

Blower Purge Cycle: 30 minutes after the blower has turned off, the purge cycle will run automatically for 5 minutes.

Blower Internal Timer: Once the blower has been turned on, the 30 minute timer will start. At the end of 30 minutes, the blower will automatically turn off.

DELICAIR II

On/Off Air Button: The blower can be turned on or off by pressing this button. Press the button once and the blower will turn on. Press the button again and the blower will turn off.

Manual Purge: After the wash has completed and you have drained the sink, turn on the blower for 30 seconds. This procedure will need to be performed after each use of the sink. This will purge the remaining water from the system.

Aquatic Industries, Inc.

Delicair Laundry Basin specifications

The Aquatic Delicair Laundry Basin is a cutting-edge addition to modern laundry technology, designed to combine efficiency with elegance. This innovative product redefines the laundry experience by integrating durability, functionality, and style, catering to the needs of today’s environmentally conscious consumers.

One of the main features of the Aquatic Delicair Laundry Basin is its superior design. Constructed from high-quality, stain-resistant materials, the basin is both easy to clean and built to last. The sleek, minimalist aesthetic fits seamlessly into any laundry room or utility space, providing a sophisticated look without compromising on performance. Its generous capacity accommodates larger loads, making it an ideal solution for busy households.

Technologically, the Delicair Laundry Basin is equipped with advanced water-saving features. The basin incorporates a smart drainage system that optimizes water usage, efficiently directing excess water while minimizing waste. This system is further enhanced by an integrated filtration system that captures lint and debris, ensuring that the water used is as clean as possible. This eco-friendly approach not only conserves resources but also promotes a sustainable lifestyle.

Another significant characteristic of the Delicair Laundry Basin is its flexibility. Designed to handle various types of fabric, including delicate items that require special care, the basin offers customizable wash settings. Users can choose from a range of options tailored to specific laundry needs, such as gentle washing for sensitive fabrics or heavy-duty cycles for tough stains. This adaptability ensures that every item, from everyday garments to luxury fabrics, receives the attention it deserves.

Furthermore, the basin features an ergonomic design, with a comfortable height and an accessible layout that prevents strain during use. The built-in drying shelf provides additional convenience, allowing users to air-dry delicate items without the need for a separate drying rack.

In summary, the Aquatic Delicair Laundry Basin combines aesthetic appeal with advanced technology and exceptional functionality. Its innovative design, water-saving capabilities, and versatile features make it a must-have for anyone seeking to enhance their laundry experience, all while contributing to a more sustainable future.