Eiki LC-WB42N Maintenance and Cleaning, WARNING indicator, indicator is blinking red, Top Control

Models: LC-WB42N

1 85
Download 85 pages 46.34 Kb
Page 64
Image 64
Maintenance and Cleaning

Maintenance and Cleaning

WARNING indicator

The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance.

The projector is shut down and the WARNING

Top Control

indicator is blinking red..

 

When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER ON/STAND-BY button.

WARNING blinking red

Note:

The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking.

Then check the matters below:

Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent.

Are the filters clean? Clean the filters periodically.

The projector is shut down and the WARNING indicator lights red..

When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK.

Top Control

WARNING indicatorThe projector is shut down and the WARNINGTop Controlindicator is blinking red..Then check the matters below: WARNING emit a red light

64

Page 64
Image 64
Eiki LC-WB42N Maintenance and Cleaning, WARNING indicator, The projector is shut down and the WARNING, Top Control, Note