Eiki LC-WB42N Computer Input Computer System Selection, Selecting Computer System Manually

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, UXGA or WUXGA with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 76-77)

One of the following messages may appear when:

Auto

-----

Mode 1

The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.34-35).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on pp.69-72.)

The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-5(pp.34-35).

PC System Menu

The PC System Menu Selected system is displayed.

SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Systerm and then
	press the Point ► or the SELECT button.
3	Use the Point ▲▼ buttons to select the desired system
	and then press the SELECT button.

Customized Mode (1–5)set in the PC adjust Menu

PC System Menu (pp.34-35).

RGB(Computer 1)

Systems in this dialog box can be selected.

32