Eiki LC-WB42N Computer Input, Input Source Selection Computer 1 RGB / Component / RGBScart, Note

Computer Input

Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )

Direct Operation

Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Top Control	INPUT button
		Computer 1

Computer 2 

HDMI

Video

S-video

Network

COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1 and
	then press the Point ► button to access the submenu

items.

Remote Control

COMPUTER button

Computer 1

Computer 2 

Input Menu

3 When Computer 1 is selected, use the Point ▲▼ buttons to select RGB and then press the SELECT button.

Computer

1

Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.48).

30