Eiki LC-WB42N Video Input Input Source Selection Component, RGB Scart 21-pin, HDMI, Hdmi, Note

Video Input

Input Source Selection (Component, RGB Scart 21-pin, HDMI)

Direct Operation

Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control; choose HDMI by pressing the INPUT button on the top control or press the HDMI button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described

below.			Top Control	INPUT button
Remote Control				Computer 1
	HDMI button
	HDMI			Computer 2 
	COMPUTER button
	Computer 1			HDMI
	Computer 2			Video
	COMPUTER 2 can not be selected when using the COMPUTER IN 2/			S-video
	MONITOR OUT terminal as MONITOR OUT output.
Menu Operation			Input Menu	Network
1
	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1 and
	then press the Point ► button; use the Point ▲▼
	buttons to select HDMI, and then press the SELECT
	button.
3	When Computer 1 is selected, use the Point ▲▼
	buttons to select Component or RGB(Scart) and then

press the SELECT button.

Component

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component.

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

HDMI

When the video signal is connected to the HDMI terminal, select HDMI.

Note:

•Network is for the Network function. See the owner’s manual of “Network Set-up and Operation” .

•When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.48).

41