Using your microwave oven
Microwave oven controls
There are three parts in the control section:
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, a tone sounds and the Display shows 88:88. If after you set the Clock (page 61,the Display again shows all S’s, it means your electricity was off for a while. Reset the Clock.
Digital display/clock and indicator lights
When you are not using the micro- wave oven, this is an accurate digital clock. When you are using the micro- wave oven, it dis- plays time settings, indicator lights and shows what number pads you touched.
Command pads
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
See page 6 for information on the tone.you hear when touching any pad.
Each Command Pad (except START,CANCEL, and CLOCK SET)lights an Indicator Light when you touch the Command Pad.
While the oven is running, an Indicator Light (or lights) will be on to show what the oven is doing.
Number pads
Once you’ve touched a Com- mand Pad to tell the oven what you want it to do, you’ll touch Number Pods to tell it...
- 0 time,
