dQWI-I

The Display counts down the time to show how much time is left in the first cycle.

When the cooklng time ends, “End” will show on the Dlsplay and 4 beeps will sound. (YaIUcan stop the beeplng by openlng the door or by touching CANCEL.) “End”will remaln on the Dls- olav and a remlnder tone will sound &rY 30 seconds until the door Is opened or CANCEL Istouched. The Dlspiay wlli then show the time of day.

Changing the cooking time

Cooking time can be changed any time before touching STARTor during the cycle:

1.Touch COCK 1.

2.Touch numbers for the new time.

3.Touch START.

Cook 1will continue cooking for the new time.

lower cook powers

For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower the cooking. Each Number Pad also stands for a different percentage of Cook Power. Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.] or

percentage (lo%, 50%, 80%, etc.).

The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook Power name usually used.

automatic

 

100%

of full

power

HIGH

4

= 40% of full

power

 

9

=

90%

of full

power

 

3

=

30% of full

power

MED-LOW

8

=

80%

of full

power

 

2

= 20% of full

power

 

7

=

70%

of full

power

MED-HIGH

1

=

lO%of full

power

LOW

6

=

60%

of full

power

 

0

=

TIMER (fan

and light

will be err]

5

=

50%

of full

power

MED

 

 

 

 

 

DO THIS...

 

 

 

THIS HAPPENS...

 

1. Put food in the oven and close the door.

3.Touch Number Pads for the cooking time you want.

The COOK 1 Indicator Light will come on and the Display will show four 0’s.

The Display will show the numbers you touched in the order you touched them. This example shows 7 minutes, 30 seconds.

Page 8
Image 8
Whirlpool MW3500XS manual Dqwi-I, Changing the cooking time, Lower cook powers, Percentage lo%, 50%, 80%, etc