Steel
35033801
Technical data
Hole size in deck Spout: | min.1 1/4" |
| max.1 5/8" |
Hole size in deck Valve: | min.1 1/8" |
| max. 1 1/4" |
Operating pressure: | max. 147 psi |
Recommended operating press.:14.7 - 72.5 psi
Test pressure: | 232 psi |
Hot water temperature: | max. 176° F |
Recommended hot water temp.: 149° F
Assembly
1.Flush pipe lines thoroughly.
2.Mount spout and valves onto lavatory. The hot water supply (red point on valve) should be connected to the LHS and the cold on the RHS.
3.Screw
4.Starck/Allegroh:
Attach compression "Y" onto bottom of spout fitting. Screw in stainless steel flex hose connectors into "Y" and onto side outlet of hot and cold valves.
Carlton/Phoenix/Terrano/Steel: Connect flex hose with valves.
5.Attach handle trim and connect
6.Turn on supply stops and check function of faucet.
7.Check all connections for leakage.
Major pressure differences between cold and hot water in supply should be avoided and balanced.
3