Panasonic SC-PT22 manual Menu 2 Video, Menu 3 Audio

AUDIO

[DVD-V] [DivX] (with multiple soundtracks)

To select audio soundtrack

[DVD-VR] [VCD]

To select “L”, “R”, “L+R” or “L R”

Actual operations depend on the disc. Read the disc’s instructions for details.

Signal type/data

LPCM/PPCM/ D/DTS/MP3/MPEG: Signal type kHz (Sampling frequency)/bit/ch (Number of channels)

e.g. 3/2 .1ch

.1: Low frequency effect

(not displayed if there is no signal)

.0: No surround

.1: Mono surround

.2: Stereo surround (left/right)

.1: Center

.2: Front leftiFront right

.3: Front leftiFront rightiCenter

≥[DivX] It may take some time for play to start if you change the audio on a DivX video disc.

PLAY SPEED

[DVD-VR] [DVD-V]

To change play speed

–from “k0.6” to “k1.4” (in 0.1-unit steps) ≥Press [1 PLAY] to return to normal play. ≥After you change the speed

–Dolby Pro Logic II has no effect.

–Audio output switches to 2-channel stereo.

–Sampling frequency of 96 kHz is converted to 48 kHz.

≥This function may not work depending on the disc’s recording.

REPEAT MODE

(B 11, Repeat play)

A-B Repeat (To repeat a specified section)

Except [JPEG] [MPEG4] [DivX] [DVD-VR] (Still picture part) [VCD] (SVCD) Press [OK] at the starting and ending points.

≥Select “OFF” to cancel.

Menu 2 (Video)

PICTURE MODE

NORMAL

CINEMA1: Mellows images and enhances detail in dark scenes.

CINEMA2: Sharpens images and enhances detail in dark scenes.

DYNAMIC: Enhances the contrast for powerful images.

ANIMATION: Suitable for animation.

ZOOM

To select zoom sizes

NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]), k2, k4

≥[JPEG]: during pause

TRANSFER MODE

If you have chosen “PROGRESSIVE” under “VIDEO OUT (I/P)” (B 15, VIDEO menu), select the method of conversion for progressive output to suit the type of material.

≥The setting will return to “AUTO1” when the disc tray is opened, the unit is turned off or another source is selected.

When playing PAL discs

AUTO: Automatically detects the film and video content, and appropriately converts it.

VIDEO: Select when using “AUTO”, and the content is distorted.

FILM: Select this if the edges of the film

content appear jagged or rough when “AUTO” is selected. However, if the video content is

distorted as shown in the illustration to the right, then select “AUTO”.

When playing NTSC discs

AUTO1: Automatically detects the film and video content, and appropriately converts it.

AUTO2: In addition to “AUTO1”, automatically detects film contents with different frame rates and appropriately converts it.

VIDEO: Select if the video content is distorted when using “AUTO1” or “AUTO2”.

Getting Started

Playing Discs

Other Operations

			SOURCE SELECT [DivX]
		SUBTITLE
			When you select “AUTO” the constructing method of the DivX contents
[DVD-V] [DivX] (with multiple subtitles) [VCD] (SVCD only)
			is automatically distinguished and output. If the picture is distorted,
To select subtitle language
			select “INTERLACE” or “PROGRESSIVE” depending on which
≥On iR/iRW, a subtitle number may be shown for subtitles that are
			constructing method was used when the contents were recorded to disc.
	not displayed.
			AUTO, INTERLACE, PROGRESSIVE
[DVD-VR] (with subtitle on/off information)
To select “ON” or “OFF”
≥This may not work depending on the disc.
			Menu 3 (Audio)

ANGLE DIALOGUE ENHANCER

[DVD-V] (with multiple angles)		To make the dialogue in movies easier to hear
To select a video angle
		[DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialogue
DATE	DATE DISPLAY	recorded in the center channel)
		[DivX] (Dolby Digital, 3-channel or higher, with the dialogue recorded in
JPG
		the center channel)
[JPEG] To select “ON” or “OFF” for picture’s date display		OFF, ON

Reference

ROTATION

[JPEG] To rotate a picture (during pause)

0,------. 90,------.180,------.270

^-------------------------------------------- J

RQTX1168

13