Panasonic SC-PT22 manual Radio antenna connections, Audio and video connections, Set the voltage

2 Radio antenna connections

Using an indoor antenna

Adhesive tape	FM indoor antenna
	(supplied)
FM ANT	Affix this end of the antenna
(75 )	where reception is best.

Main unit (rear)

Using an outdoor antenna

Use outdoor antenna if radio reception is poor.

≥Disconnect the antenna when the unit is not in use.

≥Do not use the outdoor antenna during an electrical storm.

	FM outdoor antenna
FM ANT	(Using a TV antenna
(75 )	(not supplied))
75 ≠ coaxial	The antenna should be
cable	installed by a competent
(not supplied)	technician.
Main unit
(rear)

3 Audio and video connections

Basic setup example

Refer to the operating		TV
instructions for the TV,
cable or satellite STB,
or VCR for the settings
necessary to output its
audio from the AUDIO
OUT terminal to your
home theater system.
Audio cable	Video cable
(not supplied)	(supplied)
	AUX/TV	PR
	L	VIDEO
		OUT
		PB
	R	Y
		COMPONENT VIDEO OUT
		Main unit (rear)

You can enjoy the audio from your TV, cable or satellite STB, or your VCR through this home theater system by connecting to the AUX/TV terminal.

Select “AUX/TV” as the source (B 9).

Other video connection
[COMPONENT\VIDEO\OUT]
This connection provides a much purer picture than the VIDEO OUT
terminal.
Connect the Component Video cable (not supplied) from the						Started
COMPONENT VIDEO OUT terminal on the main unit to the
COMPONENT VIDEO IN terminal on your TV.
To enjoy progressive video
≥Connect to a progressive output compatible TV.						Getting
– Set “VIDEO OUT (I/P)” in VIDEO menu to “PROGRESSIVE” and then
follow the instructions on the menu screen (B 15).
≥Panasonic TVs with 576/50i·50p, 480/60i·60p input terminals are
progressive compatible. Consult the manufacturer if you have another
brand of TV.
≥Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥Only one video connection is required. Choose one of the video						Guide
[Note]
connections above depending on your TV.
If you have various sound sources (such as Blu-ray player, DVD recorder,						Start
VCR, etc.), connect them to the available inputs on the TV and the TV
output should then be connected to the AUX/TV terminal of the main unit.						Quick
step 3	AC mains lead connection
		For Southeast Asia
	Before connecting the AC mains lead
	Set the voltage.
			VOLT
			ADJ	110−127V	220−240V

	Use a flat-head screwdriver to move the voltage
	selector to the appropriate position for the area
AC IN	in which this system is used.

Main unit (rear)

To household mains socket

AC mains lead (supplied)

For Saudi Arabia and Kuwait

BE SURE TO READ THE CAUTION FOR THE AC

MAINS LEAD ON PAGE 21 BEFORE CONNECTION.

Conserving power

The main unit consumes a small amount of power, even when it is in standby mode (approx. 0.9 W). To save power when the unit is not to be used for a long time, unplug it from the household mains socket.

You will need to reset some memory items after plugging in the main unit.

[Note]

The supplied AC mains lead is for use with the main unit only.

Do not use it with other equipment. Also, do not use cords for other equipment with the main unit.

Power failure resume

This unit will memorize the playback position when there is a power failure.

After the power supply recovers, turn on your TV and the main unit. Playback will resume from the point at which it was stopped.

[Note]

≥The resume playback timing may vary a few seconds.

≥This function may not work for files that do not have resume playback.

≥The position is cleared if the disc tray is opened or the USB device is removed.

RQTX1168

7