American Standard T028.50X Install Trim Install Handle, Check proper operation of Handle

1	INSTALL TRIM	2	INSTALL HANDLE
	CAUTION: Protect finish on SHOWER ARM,		Find correct position of HANDLE (1) and push
	SHOWER HEAD and TUB SPOUT when installing.
	When finished tiling the wall, remove PLASTER GUARD (A)		HANDLE (1) onto VALVE STEM (4).
	and turn off water supply.		Install HANDLE SCREW (2) and push in INDEX
	Push CAP (1) over VALVE CARTRIDGE (2).		CAP (3).
	Mount ESCUTCHEON (3) and gasket to valve body with SCREWS (4).		Check proper operation of HANDLE (1).
	Remove PIPE CAPS (5) from shower pipe and tub filler pipe.		Turn on water supply on and test installed fitting.
			Operate valve and diverter spout.
	Install SHOWER ARM with FLANGE (6) and SHOWER HEAD (7).
	Install TUB FILLER SPOUT with FLANGE (8).

		SHOWER ARM
		FLANGE
				6	Off						4
											1
				7							2
											3
	5				Hot
A	2
		1
		4
		Off			3
		H	o	t
											3
							57	9
								11	3		5
						3				1
					1
					0					51
				8							1
											4

5SPOUT FLANGE

3 ADJUST HOT LIMIT STOP 2

By restricting HANDLE rotation and limiting the amount of hot
water allowed to mix with the cold, the HOT LIMIT SAFETY
STOP (1) reduces risk of accidental scalding. To set the maximum
hot water temperature of your faucet, all you need to do	3
is adjust the setting on the HOT LIMIT SAFETY STOP (1).

Turn CARTRIDGE STEM (2) to the OFF position (coldest setting) before making adjustment to HOT LIMIT STOP (1). Use a

flat blade screwdriver to pry free the HOT LIMIT SAFETY STOP (1). Pull forward and rotate counterclockwise one number to limit hot water temperature. Use ARROW (3) on CARTRIDGE (4) and NUMBERS (5) on HOT LIMIT STOP (1) for indication.

1

3

5

7

9

1

1

1 5 1 3

2

HOTTER

(Smaller Numbers)

0 1 3 5 7 9 11 13 15

5

4

1

COLDER

(Larger Numbers)

0 1 3 5 7 9 11 13 15

3

5

7

9

1

1 5 1 3 1

1

M 9 6 8 8 3 4