USING A WALL CLIP
To attach the TW3001AR receiver to a wall using the supplied wall clip, refer to Figure 2 and do the following:
1.Attach the wall clip to a wall using two screws (not supplied).
2.Slide the receiver into the clip until the two holes on the bottom of the receiver align with the two holes on the lower flange of the clip.
3.Attach the receiver to the clip using the two Phillips pan head screws provided with the clip.
UPPER
FLANGE
VERTICAL
MOUNTING HOLE (2)
HORIZONTAL
TW3001AR
MOUNTING HOLE (2)
LOWER
SCREW, PHILLIPS 
WALL CLIPFLANGE
PAN HEAD WITH
LOCK WASHER (2)
Figure 2. Mounting the TW3001AR Using the Wall Clip
8 |