Pelco HS2000 Tamper Switch Installation, Tamper Switch Wiring, Care and Maintenance

Page 6

4.4 TAMPER SWITCH INSTALLATION

The HS2000 enclosures come standard from the fac- tory with a tamper switch installed. Should it become necessary to install a replacement switch, refer to Fig- ure 1 for the correct position of the bracket/switch and perform the following steps:

1.Remove the front cover.

2.Install the bracket/switch and secure with lockwashers and nuts.

4.5 TAMPER SWITCH WIRING

The tamper switch comes with both a “Normally Open” and a “Normally Closed” contact.

For a “Normally Open” circuit, use the “open” and “common” terminals; for a “Normally Closed” circuit, use the “closed” and “common” terminals.

5.0 CARE AND MAINTENANCE

Maintenance performed at regularly scheduled inter- vals will help prolong the operational life and appear- ance of the equipment.

1.Clean the Lexan window with a mild non-abra- sive detergent in water and a soft cloth regularly to help maintain picture clarity. For a heavily soiled window, use vinyl cleaner.

NOTE: Pelco offers a 24-hour, seven-day-a week Technical Assistance Program (TAP) de- signed to assist any customer with a technical problem involving Pelco equipment whether it’s the weekend or late at night. For technical as- sistance dial (800) 289-9100 and you will be connected to a Pelco TAP member who is trained to answer your questions.

Pelco also guarantees one-day turnaround on any Pelco equipment sent in for repair. This includes warranty and non-warranty items. Refer to the section on “Warranty and Return Information” in this manual for the proper pro- cedure.

Figure 1. HS2000 Series Tamper Switch Installation

4

Pelco Manual C494M-D (1/96)

Image 6
Contents HS2000 Series Table of Contents List of IllustrationsRevision History High Security Enclosure Models ScopeDescription OptionsCeiling Mounting Flush InstallationWindow Installation MID-WALL MountingTamper Switch Installation Tamper Switch WiringCare and Maintenance HS2000 Mounting Template This page intentionally left blank Exploded Assembly Diagram Mechanical Parts List for HS2000 EnclosureSpecifications Mechanical ElectricalGeneral Warranty and Return Information ReturnsC494M-D