Pelco IS110 manual Camera Orientation, Module Installation

Page 18

CAMERA ORIENTATION

At the factory, the camera module is configured for ceiling mounting. For wall mounting, you must change the camera orientation or the video image could be upside down or sideways.

To change the camera orientation (refer to Figure 8):

1.Remove the camera module from the back box, if necessary.

2.Remove the tilt adjustment screw and lock washer from each side of the camera.

3.Carefully rotate the camera 180 degrees clockwise. Make sure the wiring harness does not bind.

WARNING: Failure to rotate the camera as instructed (180 degrees clockwise) could result in damage to the equipment.

NOTES:

•Make sure to orient the top of the camera to the top of the field of view.

•Make sure the wiring harness does not bind.

•Make sure to orient the service connector away from the back box.

4.Reinstall the tilt adjustment screw and lock washer on each side of the camera.

5.Verify the camera orientation.

 

TOP

 

OF CAMERA

TILT ADJUSTMENT

TILT ADJUSTMENT

SCREW AND

SCREW AND

LOCK WASHER

LOCK WASHER

BOTTOM OF CAMERA

HEATER BOARD

Figure 8. Camera Orientation

HEATER BOARD

MODULE INSTALLATION

To install the camera module into the back box:

1.Plug the connectors into the back box in the following order (refer to Figure 7 on page 17):

•Service (3-pin) connector

•Camera (10-pin) connector

•Heater board (4-pin) connector

2.Make sure the tabs on the camera bracket and the service connector are pointing out of the enclosure, away from the ceiling or wall.

3.Gently squeeze the bracket, place it against the groove inside the back box, and gently release (refer to Figure 6 on page 16).

18

C3426M-E (3/09)

Page 17 Page 19
Image 18
Page 17 Page 19
Contents IS110 Series Camclosure Page Contents List of Illustrations Regulatory Notices Radio and Television InterferenceDescription ModelsParts List IS111-DNV9XShown Actual Size Cover and Back Box Installation Basic Surface InstallationUnshielded Twisted Pair Video 4S Electrical BOX Installation Basic Surface InstallationElectrical Box Installation Plaster Ring Installation Plaster Ring Installation Side Conduit Installation Side Conduit InstallationVoltage Red Wire Black Wire Camera Module Module RemovalBack Box Connectors Module Installation Camera OrientationCamera Adjustments Varifocal Lens Zoom and Focus AdjustmentsAdjusting the Focus DN/CH Series Adjustments Switch SettingsAuto Iris Level Adjustment Vertical Phase Adjustment DAY/NIGHT Operation DW/CW Series Wide Dynamic Range Adjustments SW1-2 Line SyncSW1-4 Auto White Balance/Manual White Balance SW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Camera Positioning Positioning the CameraInstall Liner and Trim Ring Service Connector Attaching the 2.5 mm Monaural Headphone Plug Specifications GeneralCAMERA/LENS Product Warranty and Return Information
Related manuals
Manual 12 pages 28.36 Kb Manual 4 pages 6.9 Kb

IS110 specifications

The Pelco IS110 is an innovative and versatile indoor security camera designed for a wide range of surveillance applications. Combining advanced features, cutting-edge technologies, and robust design, the IS110 is ideal for businesses, retail environments, and educational institutions seeking reliable monitoring solutions.

One of the standout features of the Pelco IS110 is its high-definition video capability. The camera is equipped with a 1080p resolution sensor, delivering crisp and clear images that enable detailed monitoring of activities in the surveillance area. This high resolution ensures that users can identify faces, read license plates, and capture intricate details, even in low-light conditions, thanks to its infrared night vision capabilities.

The IS110 utilizes H.265 compression technology, which optimizes video streaming while significantly reducing bandwidth and storage requirements. This advanced compression allows users to store more footage without compromising on quality, making it a cost-effective solution for long-term surveillance.

Another key characteristic of the Pelco IS110 is its wide dynamic range (WDR) functionality. This feature enhances visibility in challenging lighting conditions, enabling the camera to capture clear images even when subjects are backlit or in high-contrast environments. WDR is particularly beneficial for outdoor setups where lighting changes throughout the day, ensuring that important details are not lost.

The IS110 is equipped with intelligent video analytics, including motion detection and tampering alerts. These features enhance the camera's functionality by allowing users to receive real-time notifications when unusual activities occur or if the camera is obstructed. This proactive approach to security helps organizations respond swiftly to potential threats.

Furthermore, the Pelco IS110 offers robust connectivity options, including support for Power over Ethernet (PoE). This allows for easy installation and reduced cabling requirements, as both power and data can be transmitted over a single cable. The camera is also compatible with various video management systems, enabling seamless integration into existing security infrastructures.

With its sleek and discreet design, the Pelco IS110 blends well into various environments, making it an excellent choice for indoor surveillance. The camera’s durable construction ensures it can withstand everyday challenges, providing reliable performance for years to come.

In summary, the Pelco IS110 is a cutting-edge indoor security camera featuring high-definition video, advanced compression techniques, wide dynamic range, intelligent analytics, and flexible connectivity options. These characteristics make it a strong contender for anyone looking to enhance their security measures in diverse settings.
Top Page Image Contents