Auto Iris Level Adjustment

The electronics of the IS110-DW and IS110-CW Series Camclosures automatically adjust the camera to the auto iris. Auto iris level adjustments are not necessary.

VERTICAL PHASE ADJUSTMENT

Use this procedure for 24 VAC operation only.

When using more than one camera power supply, a brief vertical roll may occur on the monitor when switching from one camera to another.

To eliminate vertical roll, reverse the 24 VAC connections on one camera. If both cameras are connected to the same transformer, this should solve the problem. If the problem persists, adjust the phase control by synchronizing, or line-locking, the cameras to one another.

NOTE: When adjusting vertical phase, line sync (SW1-2) must be set to ON for AC line lock.

Adjusting Vertical Phase

You may need two people when synchronizing the cameras: one at the camera, the other at the monitor to observe the vertical roll and the effect of any camera adjustments.

To synchronize the cameras:

1.Choose a reference camera to which all other cameras will be phased.

2.Select the camera to synchronize. Use the phase adjustment control (R7) to synchronize the camera to the reference camera (refer to Figure 13 on page 25). Turn R7 clockwise to increase vertical phase; turn R7 counterclockwise to decrease vertical phase.

3.Each time an adjustment is made, switch back and forth between the camera you are adjusting and the reference camera. Repeat this process as many times as necessary until the roll between the cameras is no longer noticeable.

4.Adjust the phase of all other cameras by repeating steps 2 and 3. Always adjust to the reference camera selected in step 1.

NOTE: The preferred method for camera phase adjustment is to use a dual trace oscilloscope to align the vertical sync pulses of the reference camera to the selected camera(s).

BLEMISH DETECTION

If small white or color spots appear in the video image, one or more pixels on the camera imager may be defective. (This condition is common for both CCD and CMOS imagers.)

DW and CW Series cameras have auto iris lenses and automatically detect and correct defective pixels during startup. Manual pixel correction is not available.

28	C3426M-E (3/09)

IS110 specifications

The Pelco IS110 is an innovative and versatile indoor security camera designed for a wide range of surveillance applications. Combining advanced features, cutting-edge technologies, and robust design, the IS110 is ideal for businesses, retail environments, and educational institutions seeking reliable monitoring solutions.

One of the standout features of the Pelco IS110 is its high-definition video capability. The camera is equipped with a 1080p resolution sensor, delivering crisp and clear images that enable detailed monitoring of activities in the surveillance area. This high resolution ensures that users can identify faces, read license plates, and capture intricate details, even in low-light conditions, thanks to its infrared night vision capabilities.

The IS110 utilizes H.265 compression technology, which optimizes video streaming while significantly reducing bandwidth and storage requirements. This advanced compression allows users to store more footage without compromising on quality, making it a cost-effective solution for long-term surveillance.

Another key characteristic of the Pelco IS110 is its wide dynamic range (WDR) functionality. This feature enhances visibility in challenging lighting conditions, enabling the camera to capture clear images even when subjects are backlit or in high-contrast environments. WDR is particularly beneficial for outdoor setups where lighting changes throughout the day, ensuring that important details are not lost.

The IS110 is equipped with intelligent video analytics, including motion detection and tampering alerts. These features enhance the camera's functionality by allowing users to receive real-time notifications when unusual activities occur or if the camera is obstructed. This proactive approach to security helps organizations respond swiftly to potential threats.

Furthermore, the Pelco IS110 offers robust connectivity options, including support for Power over Ethernet (PoE). This allows for easy installation and reduced cabling requirements, as both power and data can be transmitted over a single cable. The camera is also compatible with various video management systems, enabling seamless integration into existing security infrastructures.

With its sleek and discreet design, the Pelco IS110 blends well into various environments, making it an excellent choice for indoor surveillance. The camera’s durable construction ensures it can withstand everyday challenges, providing reliable performance for years to come.

In summary, the Pelco IS110 is a cutting-edge indoor security camera featuring high-definition video, advanced compression techniques, wide dynamic range, intelligent analytics, and flexible connectivity options. These characteristics make it a strong contender for anyone looking to enhance their security measures in diverse settings.