Pelco MPS524DT/220 operation manual Important Safeguards and Warnings

Page 3

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed:

1.Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P enclo- sure, it is designed for indoor use only and it must not be installed where exposed to rain or moisture.

3.Only use replacement parts recommended by Pelco.

4.After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts and have not been connected to line circuitry.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

Pelco Manual C545M-E (2/02)

3

Image 3
Contents MPS5DT, MPS524DT Contents Important Safeguards and Warnings MPS5DT DescriptionModels OptionsInstallation Connector AssemblyPIN Function Specifications Completing the InstallationOperation General Operating DistancesRevision History Regulatory Notices