Power Cord: | Unit is supplied with grounded power cord (either U. S. Standard | |||
| or Continental European Standard) |
| ||
Output Connector: | AMP CPC type, 14 pin (mate supplied) |
| ||
Cable Requirements: | 4 conductors for PS7/PS30 models and 6 for | |||
Operating Distances: | The following are the recommended cable distances between the | |||
| control and the listed scanners. The PS20 and | |||
| ered locally and do not use power from the controller. | |||
|
|
|
|
|
|
| 20 AWG | 18 AWG | 16 AWG |
|
| (0.5 mm2) | (1.0 mm2) | (1.5 mm2) |
| 745 ft | 1185 ft | 1885 ft | |
| (227 m) | (361 m) | (575 m) | |
|
| |||
|
|
|
|
|
| PS30A | 2265 ft | 3605 ft | 5720 ft |
| (690 m) | (1098 m) | (1743 m) | |
|
| |||
|
|
|
|
|
| 115 ft | 185 ft | 295 ft | |
| (35 m) | (56 m) | (90 m) | |
|
| |||
|
|
|
|
|
| PS20 | 2,300 ft | 3,700 ft | 5,900 ft |
| (701 m) | (1,127 m) | (1,798 m) | |
|
| |||
|
|
|
|
|
| 5,600 ft | 9,000 ft | 14,300 ft | |
| (1,706 m) | (2,743 m) | (4,368 m) | |
|
| |||
|
|
|
|
|
| NOTE: A relay box can be used to extend the maximum operating | |||
| distance (control to relay box) to 13,000 feet using 16 AWG. | |||
GENERAL |
|
|
|
|
Construction |
|
|
|
|
Cover: | Steel, black polyester powder coat |
| ||
Chassis: | Steel, zinc plated |
|
| |
Panel: | Aluminum, black polyester powder coat with white silkscreen | |||
Unit Size: | 5.50 (W) x 1.75 (H) x 8.90 (D) inches (13.97 x 4.45 x 22.61 cm) | |||
| Refer to Figure 2. |
|
| |
Unit Weight |
|
|
|
|
MPS5DT: | 3 lb (1.36 kg) |
|
|
|
MPS524DT: | 4 lb (1.80 kg) |
|
|
|
MPS524DT/220: | 4 lb (1.80 kg) |
|
|
|
(Design and specifications are subject to change without notice.)
Figure 2. Dimension Drawing
Pelco Manual | 7 |