About storage and inspection after use

Always take the digital camera out of the Case.

Make sure that no dirt or dust is stuck to the O-ring.

Thoroughly dry the Case at room temperature and then store it in a cool, dark place.

We recommend that the Case be inspected about 3 years after purchase. This inspection involves dismantling and cleaning the Case, inspecting all the parts and repairing them if necessary and checking the waterproofness of the Case using the same hydrostatic test equipment that was used to check the waterproofness before purchase. The customer is responsible for all transportation costs.

Do not dismantle any parts or use any accessories not specified in these operating instructions and do not alter the Case. If the Case does not work properly, consult your dealer.

Specifications

Compatible model:

DMC-TZ2/DMC-TZ3 (As of March 2007*)

Mass:

Approx. 430 g/15.2 oz

Dimensions:

Approx. 155 mm (W)k94 mm (H)k93 mm (D)

 

[6 1/8q (W)k3 3/4q (H)k3 5/8q (D)]

Material:

(excluding the projecting parts)

Polycarbonate

Waterproof construction:

O-ring sealing

Water resistant depth:

40 m/130 feet

*Refer to the operating instructions, catalogue, website etc. of the digital camera for the latest information on models that can be used.

23

VQT1F25

Page 23
Image 23
Panasonic DMW-MCTZ3 operating instructions Specifications