Panasonic DMW-MCTZ3 operating instructions Fit the O-ring evenly into the O-ring groove, Correct

INCORRECT

Inspect the opposite side of the O-ring in the same way. Apply the grease (supplied).

Preparation -Setting the O-ring- (continued)

4

5

≥Apply a rice-grain size of grease (supplied) evenly to the O-ring with the tip of your finger.

≥Dirt or dust will stick to the O-ring if you apply too much grease.

≥Use only the specified grease. If you use other types of grease, the surface of the O-ring may be damaged causing water leakage.

≥Do not apply the grease with paper or a cloth. The fibers from the paper or cloth may stick to the O-ring.

6 Fit the O-ring evenly into the O-ring groove.

Check the following:

≥ There is no dirt sticking to the O-ring. ≥ The O-ring has not come out.

≥ The O-ring is not twisted.

≥ The O-ring is not stretched too much.

CORRECT

12

VQT1F25