. Insert and tighten the four flat-head Phillips screws that secure the drive in its bay.

There are two screws on each side that secure the drive in the RMA.

4.6.3What Next

To reassemble the system, complete these tasks:

4Section 4.4 “How to Replace the Removable Media Assembly (RMA)” on page 135 Section 2.7 “How to Replace the System Cover” on page 67

When you are ready to restart the system, be sure to run OpenBoot Diagnostics (OBDiag) tests to verify that the system functions correctly with the new parts you have just installed. For additional information, see:

Section 7.6 “How to Use OpenBoot Diagnostics (OBDiag)” on page 195

You must also perform a reconfiguration boot so that your system is able to recognize4 any new device(s). For additional information, see:

Section 2.3 “How to Initiate a Reconfiguration Boot” on page 58

140 Sun Enterprise 220R Server Service Manual January 2000, Revision A

Page 140
Image 140
Sun Microsystems 220R service manual How to Initiate a Reconfiguration Boot on