The 3DRAM is a standard dynamic random access memory (DRAM) that includes a multi-level cache and a separate graphics port. The FBC ASIC provides acceleration for 2D and 3D imaging primitives. This, combined with the 3DRAM cache and support for graphics operations, supports a high-performance frame buffer.
C.1.6 Peripherals
The following sections describe peripherals that are supported by the system:
4Section C.1.6.1 “CD-ROM Drive” on page 260 Section C.1.6.2 “Hard Drives” on page 260
C.1.6.1 CD-ROM Drive
The Sun StorEdgeTM CD32 CD-ROM drive is a 32x-speed (maximum) read-only random access CD-ROM device. It operates on the industry-standard SCSI-2 interface. The CD32 drive uses standard 4.76-inch (120-mm), 644-Mbyte compact disks. The Sun StorEdge CD32 Installation and User's Guide, part number 805-4237, provides cleaning, jumper setting, and operation instructions for the CD-ROM drive.
Note - The CD-ROM drive is factory set to SCSI target ID 6. Refer to the Sun StorEdge CD32 Installation and User's Guide, part number 805-4237, to change the target address.
C.1.6.2 Hard Drives
The system supports two SCSI hard drive capacities: 9.1-Gbyte and 18-Gbyte. The hard drives have a single connector configuration. A drive bracket is used to mount the drive. The following table lists the supported hard drives.
Form Factor | Disk Drive | Wide | RPM | Average Seek |
Dimension | Capacity | | | Time (Read/ |
| | | Write) |
| | | |
| | | | |
1.00-inch (2.54 | 9.1 Gbytes | Yes | 10K | 5.4 msec/6.2 |
cm) | | | | msec |
1.00-inch (2.54 | 18 Gbytes | Yes | 10K | 7/5 msec/8.5 |
cm) | | | | mses |
| | | | |
The 9-Gbyte 10K rpm Disk Drive Specifications SCA Interface, part number 805-5637, provides installation instructions, power requirements, and performance data for the 9.1-Gbyte hard drive. The 18-Gbyte 10K rpm Disk Drive Specifications, part number
260 Sun Enterprise 220R Server Service Manual ♦ January 2000, Revision A
