Sun Microsystems 220R - page 172

2. Insert the cutout end of the DC-to-DC converter board into the slots on the
metal tabs in the chassis.
Insert the DC-to-DC board into the metal slots at an angle so that the post holes
on the back of the converter board align with the plastic retainingclip posts.
3. Lower the DC-to-DC converter onto the plastic retaining clips.
Ensure that the other end of the DC-to-DC converter board remainsin place in
the metal tabs.
4. Secure the DC-to-DC converter board in place.
Push down on the board until the plastic tabs secure the boardin place.
172 Sun Enterprise 220R Server Service Manual ♦January 2000, Revision A