the SunVTS graphical interface in the OpenWindowsTMenvironment of the
workstation.
2. Remotely log in to the server as superuser (root).
3. Check whether SunVTS software is loaded on the server.
SunVTS is an optional package that may or may not have been loaded when the
server software was installed. For more information, see Section 7.9 “How to
Check Whether SunVTS Software Is Installed” on page 208.
4. Tostart the SunVTS software,type:
#cd /opt/SUNWvts/bin
#./sunvts -display local_hostname:0
Substitute the name of the server you are using for local_hostname. Note that /
opt/SUNWvts/bin is the default /bin directory for SunVTS software. If you
have installed SunVTS software in a different directory, use the appropriate path
instead.
When you start SunVTS software, the SunVTS kernel probes thetest system
devices. The results of this probe aredisplayed on the Test Selection panel. For
each hardware device on your system, there is an associatedSunVTS test.
5. Fine-tune your testing session by selecting only the tests you want to run.
Click to select and deselect tests. (A check mark in the box indicates the item is
selected.)
210 Sun Enterprise 220R Server Service Manual ♦January 2000, Revision A