Sun Microsystems 220R service manual Turn on power to the monitor or terminal

2.2.2What to Do

Caution - Never move the system when system power is on. Movement can cause catastrophic disk drive failure. Always power off the system before moving it.

Caution - Before you power on the system, make sure that the cover is properly installed.

1.Turn on power to any peripherals and external storage devices.

Read the documentation supplied with the device for specific instructions.

2.Turn on power to the monitor or terminal.

A terminal or monitor is required for viewing system messages. For setup instructions, see Section 2.11 “How to Attach an Alphanumeric Terminal” on page 74 or Section 2.12 “How to Configure a Local Graphics Console” on page 75.

3.Turn the front panel keyswitch to the Power-On/Off position.

See Section 2.9.1 “Keyswitch Settings” on page 72 for information about each keyswitch setting.

4.Press the front panel Power button once.

See Section 2.9.1 “Keyswitch Settings” on page 72 for information about each keyswitch setting.

56 Sun Enterprise 220R Server Service Manual ♦ January 2000, Revision A