CHAPTER 7

Diagnostics and Troubleshooting

This chapter describes the diagnostic tools available for the system and provides an introduction to using these tools. The chapter also provides information about error indications and software commands to help you determine what component of the system you need to replace.

With the exception of internal disk drives in the Sun Enterprise 220R server, all other component installation or replacement must be performed by a qualified service provider.

The following tasks are covered in this chapter:

Section 7.3 “How to Use POST Diagnostics” on page 188

Section 7.6 “How to Use OpenBoot Diagnostics (OBDiag)” on page 195

Section 7.7 “How to Set the Diagnostic Level for POST and OBDiag” on page 205

Section 7.9 “How to Check Whether SunVTS Software Is Installed” on page 208

Section 7.10 “How to Use SunVTS Software” on page 209

Other information covered in this chapter includes:

Section 7.1 “About Diagnostic Tools” on page 186

Section 7.2 “About Power-On Self-Test (POST) Diagnostics” on page 187

Section 7.5 “About OpenBoot Diagnostics (OBDiag)” on page 192

Section 7.8 “About SunVTS Software” on page 206

Section 7.11 “About Sun Enterprise SyMON Software” on page 211

4Section 7.12 “About Troubleshooting Your System” on page 211 Section 7.13 “About Diagnosing Specific Problems” on page 225

185

Page 185
Image 185
Sun Microsystems 220R service manual Diagnostics and Troubleshooting, 185