Sun Microsystems 220R Removing and Installing Storage Devices, 4.1 How to Remove a Disk Drive

CHAPTER 4
Removing and Installing Storage
Devices
This chapter describes how to remove and install the system’s storage and removable
media devices. For a list of part numbers for field-replaceable units and optional
equipment, see Appendix D.
The following tasks are covered in this chapter:
Section 4.1 “How to Remove a Disk Drive” on page 127
Section 4.2 “How to Install a Disk Drive”on page 130
Section 4.3 “How to Remove the Removable Media Assembly (RMA)” on page 132
Section 4.4 “How to Replace the RemovableMedia Assembly (RMA)” on page 135
Section 4.5 “How to Remove a CD-ROM or TapeDrive ” on page 138
Section 4.6 “How to Install a CD-ROM or Tape Drive” on page 139
4.1 How to Remove a Disk Drive
The system’s disk “hot-plug” feature lets you remove a disk drive without shutting
down the operating system or turning off the system power.For more
information, see your Sun Enterprise 220R Server Owner’s Guide.
4.1.1 Before You Begin
Complete this task:
Section 2.8 “How to Avoid Electrostatic Discharge” on page 69
127