Sun Microsystems 220R service manual How to Replace the System Cover, Before You Begin What to Do

2.6.3What Next

You are now ready to install, remove, or replace components inside the system chassis.

4To reassemble the system, see:

Section 2.7 “How to Replace the System Cover” on page 67

2.7How to Replace the System Cover

2.7.1Before You Begin

Caution - Do not operate the system while the system cover is removed.

2.7.2What to Do

1.Insert the system cover into the recessed hinge cutouts on the back panel. Grasp the system cover by its sides, and lower the panel downwards and toward the front of the enclosure.

The system cover hinges on two recessed cutouts on the back panel of the enclosure.

Preparing to Service the System 67