Sun Microsystems 220R service manual How to Slide the System Into the Rack, Before You Begin

2.5How to Slide the System Into the Rack

2.5.1Before You Begin

4If you have been working inside the system, see:

Section 2.7 “How to Replace the System Cover” on page 67

2.5.2What to Do

1.Release the two flat spring catches that lock the system into its current position.

Press in on both spring catches to free the system glides. One flat spring catch is attached to each inner glide on the system chassis, as shown in the following figure

Preparing to Service the System 63