Sun Microsystems 220R service manual Repeat Steps 3 through 5 for each module you want to install

4.Align the module with its socket until it contacts the socket evenly along the socket's length.

5.Press firmly down on both corners of the module until the bottom edge is firmly seated in the socket.

You will hear a clicking sound when the module is fully seated.

6.Repeat Steps 3 through 5 for each module you want to install.

3.2.4What Next

4Complete this task to reassemble the system:

Section 2.7 “How to Replace the System Cover” on page 67

When you are ready to restart the system, be sure to run OpenBoot Diagnostics tests to verify that the system functions correctly with the new parts you have just installed. For additional information, see:

Servicing the Main Logic Board and Components 93