Sun Microsystems 220R service manual How to Initiate a Reconfiguration Boot, Before You Begin

Note - The Locked position prevents accidentally powering-off the system. See Section 2.9.1 “Keyswitch Settings” on page 72 for information about each keyswitch setting.

2.3How to Initiate a Reconfiguration Boot

2.3.1Before You Begin

After installing any internal or external storage device, or any new part that plugs into the main logic board, except CPU modules or DIMMs, you must perform a reconfiguration boot so that your system is able to recognize the newly installed option(s).

A terminal or a graphics console is required for viewing system messages. For information about connecting a terminal or a console, see Section 2.10 “About Communicating With the Server” on page 73 or your Sun Enterprise 220R Server Owner's Guide.

Caution - Before you power on the system, make sure that the system cover is properly installed and that the and doors are closed.

58 Sun Enterprise 220R Server Service Manual ♦ January 2000, Revision A