∫Notes
≥Check one more time that the
≥Avoid opening or closing the Case where there is a lot of sand or dust and in humid or wet places.
≥If there is a sudden change in temperature, condensation may appear inside the Case.
≥If sunscreen or sun oil sticks to the Case, wash it off immediately with lukewarm water to prevent reduced waterproofness or discoloration.
∫Attaching the weights About using the weights
Attach the weights to adjust to the preferred buoyancy when using the marine case. Use them as necessary.
Refer to the following about buoyancy underwater.
1If you use the digital camera and the marine case only:
They will float slowly in fresh water or seawater. (Plus buoyancy)
2If you use the digital camera, the marine case and 1 weight:
They will float even more slowly in fresh water or seawater than 1. (Plus buoyancy)
3If you use the digital camera, the marine case and 2 weights: They will sink slowly in fresh water or seawater. (Minus buoyancy)
How to attach the weights
If you use 1 weight, align the protruding part of the weight with the tripod receptacle on the marine case and then use the supplied screw to attach it. If you use 2 weights, align the projecting part of the second weight with the indented part of the first weight so that the weights do not overlap and then attach them to the tripod receptacle.
∫Note
≥To prevent rusting, detach the weights after use, wipe off any salt and then store them.
17
