TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
4.5.4 Wireless Bridge
Choose “WirelessÆWireless Bridge”, you will see the screen of Wireless--Bridge settings
shown as below. You can configure wireless bridge features of the wireless LAN interface and
click Apply/Save button to save the current configuration.
Figure 4-92
¾ AP Mode: Select an AP Mode from the drop-down list. Options available are: Access Point
and Wireless Bridge.
Access Point: Select this option to allow wireless stations including AP clients to access.
Wireless Bridge: Also known as WDS (Wireless Distribution System), it will bridges the
wireless stations which also in bridge mode to connect two or more remote LANs.
¾ Bridge Restrict:
Disabled: Select this option to disables wireless bridge restriction, that any wireless bridge
will be granted access.
Enabled: Select this option (as shown below) to enables wireless bridge restriction, please
enter the MAC address of the Remote Bridges that you want to connect with, and only
these Remote Bridges are granted access.
Figure 4-93
86