TD-W8960N 
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure
¾IP Address: You can configure the Router’s IP Address and Subnet Mask for LAN Interface.
•IP Address: Enter the Router’s local IP Address, then you can access to the
•Subnet Mask: Enter the Router’s Subnet Mask, the default value is 255.255.255.0.
¾Enable IGMP Snooping: If you select the option, please choose the IGMP Mode: Standard Mode or Blocking Mode.
¾DHCP Server: These settings allow you to configure the Router‘s Dynamic Host Configuration Protocol (DHCP) server function. The DHCP server is enabled by default for the Router’s Ethernet LAN interface. DHCP service will supply IP settings to computers which are configured to automatically obtain IP settings that are connected to the Router though the Ethernet port. When the Router is set for DHCP, it becomes the default gateway for DHCP client connected to it. Keep in mind that if you change the IP address of the Router, you must change the range of IP addresses in the pool used for DHCP on the LAN.
33
