TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

¾Enable: Check this box to enable the Traffic Control function.

¾Egress Total Rate (Kbps): Enter the upload speed through the WAN port.

¾Ingress Total Rate (Kbps): Enter the download speed through the WAN port.

¾Line Rate-Upstream (Kbps): This field displays the upload speed assigned by your ISP.

¾Line Rate-Downstream (Kbps): This field displays the download speed assigned by your ISP.

¾Save/Apply: Click this button to make the configuration take effect.

)Note:

1)The Egress Total Rate and Ingress Total Rate are required to be configured. Otherwise TC rules cannot be added.

2)Only when the Router is configured to work in DSL connection does the Line Rate field display the upload/download speed assigned by your ISP. Otherwise there will be empty.

4.4.9.1 Traffic Control Rule

Choose “Advanced Setup”Æ“Traffic Control” Æ“Traffic Control Rule” and then you will see the screen as shown in Figure 4-48.This page allows you to view and configure TC rules.

Figure 4-48

To add a TC rule, click the Add button and you can configure it in the screen as shown in Figure 4-49.

52

Page 59
Image 59
TP-Link manual TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide