TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-43

Click the Add button in Figure 4-43,and you can configure the QoS queue entry on the next screen as shown in Figure 4-44.

Figure 4-44

¾Name: Set a name for the entry.

¾Enable: Select Enable option to take this entry effect.

¾Interface: Assigned a specific Wan Service for this QoS queue entry.

¾Precedence: Specify precedence for this QoS queue entry.

¾DSL Latency: Select latency path for the type of data transmission, only Path0 is available for this Router.

After you specify the condition, click Save/Apply to save the entry and then you will see you settings as shown in Figure 4-43.

49

Page 56
Image 56
TP-Link manual TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide