TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-105

¾Refresh: Click the button, the information in the table will be updated.

¾Close: Click the button, the screen will be closed.

To Configure the System Log Settings:

Click the Configure System Log button (shown in Figure 4-104),you will see the screen below (shown in Figure 4-106).

Figure 4-106

¾Disable/Enable: Select the Enable to log the events, if you don’t want to log these events, please select Disable.

¾Log Level: Select the Log level in the drop-down list, for the Log level, all events above or equal to the selected level will be logged.

¾Display Level: Select the Display level in the drop-down list, for the Display Level, all logged events above or equal to the selected level will be displayed.

¾Mode: Select the mode to record the events. If the selected mode is Local, events will be recorded in the local memory. If the selected mode is Remote, events will be sent to the specified IP address and UDP port of the remote system log server. If the selected mode is Both, events will be sent to the local memory and the remote system log server.

¾Server IP Address: Type the address of the server you want to record the events.

¾Server UDP Port: Type the UDP Port of the server.

94

Page 101
Image 101
TP-Link TD-W8960N manual To Configure the System Log Settings