TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
1.3 Panel Layout 1.3.1 The Front Panel
The Router’s LEDs are located on the front panel.
Figure 1-1
The Router’s LEDs and the QSS button are located on the front panel (View from left to right).
LED Explanation:
Name Status Indication
On The modem router is powered on.
Power Off The modem router is off. Please ensure that the power adapter is
connected correctly.
On The network is available with a successful Internet connection.
Flash There is data being transmitted or received via the Internet.
Internet
Off There is no successful Internet connection or the modem router is
operating in Bridge mode. Please refer to Note 2 for troubleshooting.
On ADSL line is synchronized and ready to use.
Flash The ADSL negotiation is in progress.
ADSL
Off ADSL synchronization fails. Please refer to Note 1 for troubleshooting.
On Wireless is enabled but no data is being transmitted.
Flash The modem router is sending or receiving data over the wireless
network.
WLAN
Off Wireless function is disabled.
On There is a device connected to this LAN port.
Flash The modem router is sending or receiving data over this LAN port.
LAN 1,2,3,4
Off There is no device connected to this LAN port.
On A wireless device has been successfully added to the network by QSS
function.
Flash
QSS handshaking is in process and will continue for about 2 minutes.
Please press the QSS button on other wireless devices that you want
to add to the network while the LED is flashing.
QSS
Off
The QSS function is disabled or the wireless device fails to be added
to the network in 2 minutes after QSS function is enabled. Please refer
to 4.5.2.1 QSS (WPS) Setup for more information.
4