TD-W8960N 
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure
¾VPI/VCI: the VPI and VCI values provided by your ISP. Do not change them unless it was required by your ISP.
¾DSL Link Type: Select a DSL Link Type which is provided by your ISP. The options include EoA (it is for PPPoE, IPoE, and Bridge), PPPoA (PPP over ATM) and IPoA (IP over ATM).
¾Encapsulation Mode: The mode of the data processing over the Link Type you have selected. Uses the default setting, if you are not sure.
¾Service Category: Select the type of the service assigned by your ISP in the
¾Connection Mode: Select the connection mode for EoA option of DSL Link Type. The options include Default mode for single service over one connection, VLAN MUX Mode for multiple Vlan service over one connection, and MSC Mode for Multiple Service over one connection.
¾Enable Quality of Service: If you want to adopt QoS (Quality of Service) for the connection, please select check box.
)Note:
Enabling packet level QoS for PVC improves performance for selected classes of applications. While QoS consumes system resources; therefore the number of PVC(s) will be reduced. Besides
20
