TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

¾WAN Interface used by TR-069 Client: Please select the WAN Interface from the drop-down list to perform this function.

¾Connection Request User Name: Type the Connection Request User Name, set it yourself.

¾Connection Request Password: Type the Connection Request Password, set it yourself.

)Note:

The Connection Request User Name and Connection Request Password used for ACS log on the Router and manage it.

Select the desired values and click Save/Apply to configure the TR-069 client options.

4.7.5 Access Control

Choose “Management”Æ“Access Control”Æ“Password”, you can see the screen (shown in Figure 4-109)which allows you to change the factory default password of the Router. The default password is the same as the user name, which is admin/admin, support/support, and user/user respectively.

Figure 4-109

To change the password:

1.Select the Username whose password you want to change.

2.Enter the Old Password in the text box.

3.Enter the New Password and Confirm Password. The Confirm Password should be the same as the New Password.

4.Click Save/Apply to make your change take effect.

)Note:

1)Access to your DSL Modem Router is controlled through three user accounts: admin, support, and user. The user name "admin" has unrestricted access to change and view configuration of your DSL Modem Router. The user name "support" is used to allow an ISP technician to

97

Page 104
Image 104
TP-Link TD-W8960N manual Access Control, To change the password